Bevboard


Results 1 to 8 of 8
  1. #1
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    236

    Post

    How big of warehouse would I need to store 10k cases of a 12 oz. beverage?

    What would you guys say is the minimum square footage needed to accomodate that many cans?

    Thank you.

    [ 07-13-2005, 03:54 AM: Message edited by: Dizz ]

  2. #2
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    236

    Post

    p.s.
    I found a listing that has 2000 sq. ft, the price is reasonable or am I just kidding myself here?

  3. #3
    Join Date
    Mar 2001
    Location
    Ok
    Posts
    1,032

    Post

    A 3'x4' pallet will hold 12 24 pk cases per layer 12 high (generally) which equals 144 cases. 2 pallets stacked will hold 288 and be approx. 10 ft. tall. Don't know building codes in your neck of the woods but in Ok you must have a minimum of 18 inches clearance below the fire ext. so if you have a 12' ceiling that is all you can stack. If the 2000 sf is a 40x50 given you allow for manuvering a forklift, cherry picker you should be able to get I would say 8 wide(40') and at least 8 deep(50') for a total of 64 single or 128 double stacked for a total of 9216 or 18432. so the answer would be YES I believe that would fit. You might have to do some hand stacking if you are only 1 pallet high to get the other 800 cases on top of the pallets but it would only be a layer or so per pallet. Hope this helped.
    If what you did yesterday still looks big, you haven't done much today.

  4. #4
    Join Date
    Jun 2005
    Location
    SoCal
    Posts
    236

    Post

    You're a saint. Thanks for your help.

  5. #5
    Join Date
    Jul 2001
    Location
    east lansing, michigan
    Posts
    1,558

    Post

    3*4 - is that how big pepsi pallets are?

    i always thought our pallets were a lot bigger...
    woot woot

  6. #6
    Join Date
    Mar 2001
    Location
    Ok
    Posts
    1,032

    Post

    No that is the size of a blue chep pallet. actually I think they are like 3'2" x 4'. A Pepsi pallet is usually 3'6" x 3', they do have some that are 3 x 3 though no as common around here anyway.
    If what you did yesterday still looks big, you haven't done much today.

  7. #7
    Join Date
    Jul 2001
    Location
    east lansing, michigan
    Posts
    1,558

    Post

    i should go measure miller's plastic pallets, the same ones that swire coke uses.

    we can stack 24pk cans in 7s, 12pk fridgies and the normal 3*4s in 7.5s (every two rows equals 15cases), miller bottles get stacked in 8s, 18pk bottles are in 10s and 30pk cans are stacked in rows of 13s. there's never gaps or holes in the middle like i see on pop pallets.
    woot woot

  8. #8
    Join Date
    Mar 2001
    Location
    Ok
    Posts
    1,032

    Post

    I wanna say Miller pallets are 2'8" x 3' I may be mistaken though. I did not specify that the 12 case of 24 pack cans were suitcases not cube packaging. However it Has been awhile since I have had to stack anything on a grocery pallet. I may be off on my case tie.
    If what you did yesterday still looks big, you haven't done much today.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •